Pennsylvania Well Records › Allegheny County › Lexington (15208)
Lexington, PA (15208): well depth, water level & drilling cost
✓ 100 PaGWIS records · Allegheny County
Pull every recorded well near a Lexington (15208) address — $49
How deep are wells in Lexington (15208), Pennsylvania?
The median drilled well depth in Lexington (15208) is 21 ft, based on 98 wells with recorded depths in the state PaGWIS database. Half fall between 17 ft and 33 ft; 90% are shallower than 37 ft.
How much does it cost to drill a well in Lexington (15208)?
Applying published per-foot rates to the local median depth of 21 ft: drilling and casing alone typically runs $525–$1,365; a complete system including pump, pressure tank, and hookup typically runs $1,260–$2,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Lexington (15208)?
The median static water level is 10 ft below ground surface (middle half of wells: 10 ft–13 ft), from 8 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Allegheny County.
Part of Allegheny County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.