Pennsylvania Well Records › Allegheny County › Pittsburgh (15222)
Pittsburgh, PA (15222): well depth, water level & drilling cost
✓ 140 PaGWIS records · Allegheny County
Pull every recorded well near a Pittsburgh (15222) address — $49
How deep are wells in Pittsburgh (15222), Pennsylvania?
The median drilled well depth in Pittsburgh (15222) is 34 ft, based on 135 wells with recorded depths in the state PaGWIS database. Half fall between 28 ft and 62 ft; 90% are shallower than 70 ft.
How much does it cost to drill a well in Pittsburgh (15222)?
Applying published per-foot rates to the local median depth of 34 ft: drilling and casing alone typically runs $850–$2,210; a complete system including pump, pressure tank, and hookup typically runs $2,040–$3,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Pittsburgh (15222)?
The median static water level is 16 ft below ground surface (middle half of wells: 11 ft–30 ft), from 31 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Allegheny County.
Part of Allegheny County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.