Pennsylvania Well Records › Bedford County › Buffalo Mills (15534)
Buffalo Mills, PA (15534): well depth, water level & drilling cost
✓ 216 PaGWIS records · Bedford County
Pull every recorded well near a Buffalo Mills (15534) address — $49
How deep are wells in Buffalo Mills (15534), Pennsylvania?
The median drilled well depth in Buffalo Mills (15534) is 156 ft, based on 215 wells with recorded depths in the state PaGWIS database. Half fall between 104 ft and 241 ft; 90% are shallower than 400 ft.
How much does it cost to drill a well in Buffalo Mills (15534)?
Applying published per-foot rates to the local median depth of 156 ft: drilling and casing alone typically runs $3,900–$10,140; a complete system including pump, pressure tank, and hookup typically runs $9,360–$15,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Buffalo Mills (15534)?
The median static water level is 20 ft below ground surface (middle half of wells: 15 ft–50 ft), from 149 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bedford County.
Part of Bedford County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.