Pennsylvania Well Records › Indiana County › Penn Run (15765)
Penn Run, PA (15765): well depth, water level & drilling cost
✓ 157 PaGWIS records · Indiana County
Pull every recorded well near a Penn Run (15765) address — $49
How deep are wells in and around Penn Run (15765), Pennsylvania?
The median drilled well depth in and around Penn Run (15765) is 130 ft, based on 151 wells with recorded depths in the state PaGWIS database. Half fall between 90 ft and 201 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in and around Penn Run (15765)?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Penn Run (15765)?
The median static water level is 45 ft below ground surface (middle half of wells: 36 ft–73 ft), from 11 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Indiana County.
Part of Indiana County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.