Pennsylvania Well Records › Elk County › Brockport (15823)
Brockport, PA (15823): well depth, water level & drilling cost
✓ 85 PaGWIS records · Elk County
Pull every recorded well near a Brockport (15823) address — $49
How deep are wells in Brockport (15823), Pennsylvania?
The median drilled well depth in Brockport (15823) is 80 ft, based on 69 wells with recorded depths in the state PaGWIS database. Half fall between 36 ft and 116 ft; 90% are shallower than 224 ft.
How much does it cost to drill a well in Brockport (15823)?
Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Brockport (15823)?
The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–45 ft), from 23 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Elk County.
Part of Elk County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.