Pennsylvania Well Records › Mercer County › Clark (16113)
Clark, PA (16113): well depth, water level & drilling cost
✓ 231 PaGWIS records · Mercer County
Pull every recorded well near a Clark (16113) address — $49
How deep are wells in and around Clark (16113), Pennsylvania?
The median drilled well depth in and around Clark (16113) is 90 ft, based on 219 wells with recorded depths in the state PaGWIS database. Half fall between 75 ft and 124 ft; 90% are shallower than 195 ft.
How much does it cost to drill a well in and around Clark (16113)?
Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Clark (16113)?
The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–60 ft), from 133 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mercer County.
Part of Mercer County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.