⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Mercer County › Sharpsville (16150)

Sharpsville, PA (16150): well depth, water level & drilling cost

✓ 362 PaGWIS records · Mercer County

105 ftmedian well depth
80 ft–155 fttypical depth range
38 ftmedian static water level
20 gpmmedian yield (264 tests)

Pull every recorded well near a Sharpsville (16150) address — $49

How deep are wells in and around Sharpsville (16150), Pennsylvania?

The median drilled well depth in and around Sharpsville (16150) is 105 ft, based on 357 wells with recorded depths in the state PaGWIS database. Half fall between 80 ft and 155 ft; 90% are shallower than 265 ft.

How much does it cost to drill a well in and around Sharpsville (16150)?

Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sharpsville (16150)?

The median static water level is 38 ft below ground surface (middle half of wells: 20 ft–75 ft), from 205 measurements.

Drilled depth distribution

0–50 ft 33 50–100 ft 123 100–150 ft 105 150–200 ft 32 200–300 ft 38 300–400 ft 20 400–600 ft 4 600+ ft 2
Looking at a specific property in Sharpsville (16150)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sharpsville (16150)

Free. Goes to licensed drillers working Mercer County.

Part of Mercer County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.