Pennsylvania Well Records › Warren County › Bear Lake (16402)
Bear Lake, PA (16402): well depth, water level & drilling cost
✓ 72 PaGWIS records · Warren County
Pull every recorded well near a Bear Lake (16402) address — $49
How deep are wells in Bear Lake (16402), Pennsylvania?
The median drilled well depth in Bear Lake (16402) is 82 ft, based on 70 wells with recorded depths in the state PaGWIS database. Half fall between 50 ft and 116 ft; 90% are shallower than 143 ft.
How much does it cost to drill a well in Bear Lake (16402)?
Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bear Lake (16402)?
The median static water level is 35 ft below ground surface (middle half of wells: 15 ft–60 ft), from 62 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Warren County.
Part of Warren County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.