Pennsylvania Well Records › Erie County › Cranesville (16410)
Cranesville, PA (16410): well depth, water level & drilling cost
✓ 269 PaGWIS records · Erie County
Pull every recorded well near a Cranesville (16410) address — $49
How deep are wells in and around Cranesville (16410), Pennsylvania?
The median drilled well depth in and around Cranesville (16410) is 53 ft, based on 266 wells with recorded depths in the state PaGWIS database. Half fall between 42 ft and 65 ft; 90% are shallower than 83 ft.
How much does it cost to drill a well in and around Cranesville (16410)?
Applying published per-foot rates to the local median depth of 53 ft: drilling and casing alone typically runs $1,325–$3,445; a complete system including pump, pressure tank, and hookup typically runs $3,180–$5,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Cranesville (16410)?
The median static water level is 10 ft below ground surface (middle half of wells: 5 ft–18 ft), from 227 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Erie County.
Part of Erie County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.