Pennsylvania Well Records › Warren County › Spring Creek (16436)
Spring Creek, PA (16436): well depth, water level & drilling cost
✓ 115 PaGWIS records · Warren County
Pull every recorded well near a Spring Creek (16436) address — $49
How deep are wells in Spring Creek (16436), Pennsylvania?
The median drilled well depth in Spring Creek (16436) is 85 ft, based on 107 wells with recorded depths in the state PaGWIS database. Half fall between 60 ft and 138 ft; 90% are shallower than 194 ft.
How much does it cost to drill a well in Spring Creek (16436)?
Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Spring Creek (16436)?
The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–76 ft), from 91 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Warren County.
Part of Warren County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.