Pennsylvania Well Records › Blair County › Altoona (16601)
Altoona, PA (16601): well depth, water level & drilling cost
✓ 369 PaGWIS records · Blair County
Pull every recorded well near a Altoona (16601) address — $49
How deep are wells in Altoona (16601), Pennsylvania?
The median drilled well depth in Altoona (16601) is 120 ft, based on 361 wells with recorded depths in the state PaGWIS database. Half fall between 35 ft and 225 ft; 90% are shallower than 365 ft.
How much does it cost to drill a well in Altoona (16601)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Altoona (16601)?
The median static water level is 28 ft below ground surface (middle half of wells: 17 ft–60 ft), from 39 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Blair County.
Part of Blair County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.