⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Blair County › Roaring Spring (16673)

Roaring Spring, PA (16673): well depth, water level & drilling cost

✓ 271 PaGWIS records · Blair County

203 ftmedian well depth
140 ft–318 fttypical depth range
95 ftmedian static water level
12 gpmmedian yield (220 tests)

Pull every recorded well near a Roaring Spring (16673) address — $49

How deep are wells in and around Roaring Spring (16673), Pennsylvania?

The median drilled well depth in and around Roaring Spring (16673) is 203 ft, based on 266 wells with recorded depths in the state PaGWIS database. Half fall between 140 ft and 318 ft; 90% are shallower than 420 ft.

How much does it cost to drill a well in and around Roaring Spring (16673)?

Applying published per-foot rates to the local median depth of 203 ft: drilling and casing alone typically runs $5,075–$13,195; a complete system including pump, pressure tank, and hookup typically runs $12,180–$20,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Roaring Spring (16673)?

The median static water level is 95 ft below ground surface (middle half of wells: 50 ft–150 ft), from 38 measurements.

Drilled depth distribution

0–50 ft 21 50–100 ft 17 100–150 ft 41 150–200 ft 41 200–300 ft 69 300–400 ft 34 400–600 ft 37 600+ ft 6
Looking at a specific property in Roaring Spring (16673)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Roaring Spring (16673)

Free. Goes to licensed drillers working Blair County.

Part of Blair County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.