Pennsylvania Well Records › Bedford County › Six Mile Run (16679)
Six Mile Run, PA (16679): well depth, water level & drilling cost
✓ 95 PaGWIS records · Bedford County
Pull every recorded well near a Six Mile Run (16679) address — $49
How deep are wells in Six Mile Run (16679), Pennsylvania?
The median drilled well depth in Six Mile Run (16679) is 181 ft, based on 94 wells with recorded depths in the state PaGWIS database. Half fall between 126 ft and 320 ft; 90% are shallower than 420 ft.
How much does it cost to drill a well in Six Mile Run (16679)?
Applying published per-foot rates to the local median depth of 181 ft: drilling and casing alone typically runs $4,525–$11,765; a complete system including pump, pressure tank, and hookup typically runs $10,860–$18,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Six Mile Run (16679)?
The median static water level is 60 ft below ground surface (middle half of wells: 30 ft–120 ft), from 41 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bedford County.
Part of Bedford County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.