Pennsylvania Well Records › Clinton County › Beech Creek (16822)
Beech Creek, PA (16822): well depth, water level & drilling cost
✓ 185 PaGWIS records · Clinton County
Pull every recorded well near a Beech Creek (16822) address — $49
How deep are wells in Beech Creek (16822), Pennsylvania?
The median drilled well depth in Beech Creek (16822) is 150 ft, based on 179 wells with recorded depths in the state PaGWIS database. Half fall between 23 ft and 300 ft; 90% are shallower than 420 ft.
How much does it cost to drill a well in Beech Creek (16822)?
Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Beech Creek (16822)?
The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–80 ft), from 69 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Clinton County.
Part of Clinton County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.