Pennsylvania Well Records › Centre County › Howard (16841)
Howard, PA (16841): well depth, water level & drilling cost
✓ 229 PaGWIS records · Centre County
Pull every recorded well near a Howard (16841) address — $49
How deep are wells in Howard (16841), Pennsylvania?
The median drilled well depth in Howard (16841) is 297 ft, based on 217 wells with recorded depths in the state PaGWIS database. Half fall between 140 ft and 340 ft; 90% are shallower than 446 ft.
How much does it cost to drill a well in Howard (16841)?
Applying published per-foot rates to the local median depth of 297 ft: drilling and casing alone typically runs $7,425–$19,305; a complete system including pump, pressure tank, and hookup typically runs $17,820–$29,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Howard (16841)?
The median static water level is 43 ft below ground surface (middle half of wells: 20 ft–80 ft), from 51 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Centre County.
Part of Centre County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.