Pennsylvania Well Records › Centre County › Pennsylvania Furnace (16865)
Pennsylvania Furnace, PA (16865): well depth, water level & drilling cost
✓ 96 PaGWIS records · Centre County
Pull every recorded well near a Pennsylvania Furnace (16865) address — $49
How deep are wells in and around Pennsylvania Furnace (16865), Pennsylvania?
The median drilled well depth in and around Pennsylvania Furnace (16865) is 160 ft, based on 89 wells with recorded depths in the state PaGWIS database. Half fall between 100 ft and 246 ft; 90% are shallower than 366 ft.
How much does it cost to drill a well in and around Pennsylvania Furnace (16865)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Pennsylvania Furnace (16865)?
The median static water level is 80 ft below ground surface (middle half of wells: 26 ft–89 ft), from 22 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Centre County.
Part of Centre County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.