Pennsylvania Well Records › Tioga County › Morris (16938)
Morris, PA (16938): well depth, water level & drilling cost
✓ 414 PaGWIS records · Tioga County
Pull every recorded well near a Morris (16938) address — $49
How deep are wells in Morris (16938), Pennsylvania?
The median drilled well depth in Morris (16938) is 144 ft, based on 405 wells with recorded depths in the state PaGWIS database. Half fall between 76 ft and 240 ft; 90% are shallower than 347 ft.
How much does it cost to drill a well in Morris (16938)?
Applying published per-foot rates to the local median depth of 144 ft: drilling and casing alone typically runs $3,600–$9,360; a complete system including pump, pressure tank, and hookup typically runs $8,640–$14,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Morris (16938)?
The median static water level is 80 ft below ground surface (middle half of wells: 32 ft–138 ft), from 109 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Tioga County.
Part of Tioga County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.