⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Mifflin County › Granville (17029)

Granville, PA (17029): well depth, water level & drilling cost

✓ 131 PaGWIS records · Mifflin County

180 ftmedian well depth
120 ft–250 fttypical depth range
38 ftmedian static water level
15 gpmmedian yield (110 tests)

Pull every recorded well near a Granville (17029) address — $49

How deep are wells in and around Granville (17029), Pennsylvania?

The median drilled well depth in and around Granville (17029) is 180 ft, based on 120 wells with recorded depths in the state PaGWIS database. Half fall between 120 ft and 250 ft; 90% are shallower than 364 ft.

How much does it cost to drill a well in and around Granville (17029)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Granville (17029)?

The median static water level is 38 ft below ground surface (middle half of wells: 30 ft–55 ft), from 45 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 18 100–150 ft 22 150–200 ft 17 200–300 ft 35 300–400 ft 10 400–600 ft 10 600+ ft 2
Looking at a specific property in Granville (17029)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Granville (17029)

Free. Goes to licensed drillers working Mifflin County.

Part of Mifflin County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.