⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Perry County › Marysville (17053)

Marysville, PA (17053): well depth, water level & drilling cost

✓ 338 PaGWIS records · Perry County

194 ftmedian well depth
135 ft–245 fttypical depth range
50 ftmedian static water level
20 gpmmedian yield (271 tests)

Pull every recorded well near a Marysville (17053) address — $49

How deep are wells in and around Marysville (17053), Pennsylvania?

The median drilled well depth in and around Marysville (17053) is 194 ft, based on 333 wells with recorded depths in the state PaGWIS database. Half fall between 135 ft and 245 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Marysville (17053)?

Applying published per-foot rates to the local median depth of 194 ft: drilling and casing alone typically runs $4,850–$12,610; a complete system including pump, pressure tank, and hookup typically runs $11,640–$19,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Marysville (17053)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–77 ft), from 198 measurements.

Drilled depth distribution

0–50 ft 23 50–100 ft 22 100–150 ft 59 150–200 ft 68 200–300 ft 111 300–400 ft 34 400–600 ft 13 600+ ft 3
Looking at a specific property in Marysville (17053)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Marysville (17053)

Free. Goes to licensed drillers working Perry County.

Part of Perry County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.