⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Perry County › New Buffalo (17069)

New Buffalo, PA (17069): well depth, water level & drilling cost

✓ 213 PaGWIS records · Perry County

173 ftmedian well depth
123 ft–224 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (200 tests)

Pull every recorded well near a New Buffalo (17069) address — $49

How deep are wells in and around New Buffalo (17069), Pennsylvania?

The median drilled well depth in and around New Buffalo (17069) is 173 ft, based on 202 wells with recorded depths in the state PaGWIS database. Half fall between 123 ft and 224 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around New Buffalo (17069)?

Applying published per-foot rates to the local median depth of 173 ft: drilling and casing alone typically runs $4,325–$11,245; a complete system including pump, pressure tank, and hookup typically runs $10,380–$17,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around New Buffalo (17069)?

The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–50 ft), from 145 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 15 100–150 ft 62 150–200 ft 40 200–300 ft 60 300–400 ft 16 400–600 ft 7 600+ ft 1
Looking at a specific property in New Buffalo (17069)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in New Buffalo (17069)

Free. Goes to licensed drillers working Perry County.

Part of Perry County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.