⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Juniata County › Port Royal (17082)

Port Royal, PA (17082): well depth, water level & drilling cost

✓ 182 PaGWIS records · Juniata County

154 ftmedian well depth
90 ft–240 fttypical depth range
60 ftmedian static water level
10 gpmmedian yield (131 tests)

Pull every recorded well near a Port Royal (17082) address — $49

How deep are wells in and around Port Royal (17082), Pennsylvania?

The median drilled well depth in and around Port Royal (17082) is 154 ft, based on 181 wells with recorded depths in the state PaGWIS database. Half fall between 90 ft and 240 ft; 90% are shallower than 315 ft.

How much does it cost to drill a well in and around Port Royal (17082)?

Applying published per-foot rates to the local median depth of 154 ft: drilling and casing alone typically runs $3,850–$10,010; a complete system including pump, pressure tank, and hookup typically runs $9,240–$15,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Port Royal (17082)?

The median static water level is 60 ft below ground surface (middle half of wells: 31 ft–96 ft), from 56 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 36 100–150 ft 33 150–200 ft 24 200–300 ft 38 300–400 ft 20 400–600 ft 8 600+ ft 7
Looking at a specific property in Port Royal (17082)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Port Royal (17082)

Free. Goes to licensed drillers working Juniata County.

Part of Juniata County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.