Pennsylvania Well Records › Juniata County › Richfield (17086)
Richfield, PA (17086): well depth, water level & drilling cost
✓ 205 PaGWIS records · Juniata County
Pull every recorded well near a Richfield (17086) address — $49
How deep are wells in Richfield (17086), Pennsylvania?
The median drilled well depth in Richfield (17086) is 200 ft, based on 205 wells with recorded depths in the state PaGWIS database. Half fall between 125 ft and 254 ft; 90% are shallower than 350 ft.
How much does it cost to drill a well in Richfield (17086)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Richfield (17086)?
The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–60 ft), from 69 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Juniata County.
Part of Juniata County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.