⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Adams County › Bendersville (17306)

Bendersville, PA (17306): well depth, water level & drilling cost

✓ 126 PaGWIS records · Adams County

160 ftmedian well depth
110 ft–255 fttypical depth range
33 ftmedian static water level
8 gpmmedian yield (116 tests)

Pull every recorded well near a Bendersville (17306) address — $49

How deep are wells in and around Bendersville (17306), Pennsylvania?

The median drilled well depth in and around Bendersville (17306) is 160 ft, based on 121 wells with recorded depths in the state PaGWIS database. Half fall between 110 ft and 255 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Bendersville (17306)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bendersville (17306)?

The median static water level is 33 ft below ground surface (middle half of wells: 19 ft–49 ft), from 84 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 16 100–150 ft 31 150–200 ft 23 200–300 ft 25 300–400 ft 11 400–600 ft 11 600+ ft 2
Looking at a specific property in Bendersville (17306)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bendersville (17306)

Free. Goes to licensed drillers working Adams County.

Part of Adams County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.