⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › York County › Seven Valleys Pa (17360)

Seven Valleys Pa, PA (17360): well depth, water level & drilling cost

✓ 441 PaGWIS records · York County

200 ftmedian well depth
138 ft–280 fttypical depth range
40 ftmedian static water level
5 gpmmedian yield (406 tests)

Pull every recorded well near a Seven Valleys Pa (17360) address — $49

How deep are wells in Seven Valleys Pa (17360), Pennsylvania?

The median drilled well depth in Seven Valleys Pa (17360) is 200 ft, based on 439 wells with recorded depths in the state PaGWIS database. Half fall between 138 ft and 280 ft; 90% are shallower than 312 ft.

How much does it cost to drill a well in Seven Valleys Pa (17360)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Seven Valleys Pa (17360)?

The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–55 ft), from 222 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 26 100–150 ft 102 150–200 ft 59 200–300 ft 143 300–400 ft 80 400–600 ft 20 600+ ft 4
Looking at a specific property in Seven Valleys Pa (17360)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Seven Valleys Pa (17360)

Free. Goes to licensed drillers working York County.

Part of York County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.