⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Lancaster County › Kirkwood (17536)

Kirkwood, PA (17536): well depth, water level & drilling cost

✓ 334 PaGWIS records · Lancaster County

200 ftmedian well depth
113 ft–300 fttypical depth range
40 ftmedian static water level
9 gpmmedian yield (311 tests)

Pull every recorded well near a Kirkwood (17536) address — $49

How deep are wells in and around Kirkwood (17536), Pennsylvania?

The median drilled well depth in and around Kirkwood (17536) is 200 ft, based on 329 wells with recorded depths in the state PaGWIS database. Half fall between 113 ft and 300 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Kirkwood (17536)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kirkwood (17536)?

The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–50 ft), from 221 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 50 100–150 ft 73 150–200 ft 33 200–300 ft 74 300–400 ft 51 400–600 ft 46 600+ ft 1
Looking at a specific property in Kirkwood (17536)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kirkwood (17536)

Free. Goes to licensed drillers working Lancaster County.

Part of Lancaster County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.