Pennsylvania Well Records › Lycoming County › Jersey Shore (17723)
Jersey Shore, PA (17723): well depth, water level & drilling cost
✓ 120 PaGWIS records · Lycoming County
Pull every recorded well near a Jersey Shore (17723) address — $49
How deep are wells in and around Jersey Shore (17723), Pennsylvania?
The median drilled well depth in and around Jersey Shore (17723) is 100 ft, based on 115 wells with recorded depths in the state PaGWIS database. Half fall between 75 ft and 150 ft; 90% are shallower than 217 ft.
How much does it cost to drill a well in and around Jersey Shore (17723)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Jersey Shore (17723)?
The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–60 ft), from 73 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lycoming County.
Part of Lycoming County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.