Pennsylvania Well Records › Sullivan County › Muncy Valley (17758)
Muncy Valley, PA (17758): well depth, water level & drilling cost
✓ 126 PaGWIS records · Sullivan County
Pull every recorded well near a Muncy Valley (17758) address — $49
How deep are wells in and around Muncy Valley (17758), Pennsylvania?
The median drilled well depth in and around Muncy Valley (17758) is 175 ft, based on 117 wells with recorded depths in the state PaGWIS database. Half fall between 61 ft and 300 ft; 90% are shallower than 500 ft.
How much does it cost to drill a well in and around Muncy Valley (17758)?
Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Muncy Valley (17758)?
The median static water level is 28 ft below ground surface (middle half of wells: 12 ft–98 ft), from 26 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Sullivan County.
Part of Sullivan County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.