⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Lycoming County › Allenwood (17810)

Allenwood, PA (17810): well depth, water level & drilling cost

✓ 154 PaGWIS records · Lycoming County

175 ftmedian well depth
110 ft–225 fttypical depth range
32 ftmedian static water level
20 gpmmedian yield (132 tests)

Pull every recorded well near a Allenwood (17810) address — $49

How deep are wells in and around Allenwood (17810), Pennsylvania?

The median drilled well depth in and around Allenwood (17810) is 175 ft, based on 149 wells with recorded depths in the state PaGWIS database. Half fall between 110 ft and 225 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Allenwood (17810)?

Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Allenwood (17810)?

The median static water level is 32 ft below ground surface (middle half of wells: 16 ft–53 ft), from 35 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 18 100–150 ft 30 150–200 ft 29 200–300 ft 43 300–400 ft 12 400–600 ft 5 600+ ft 1
Looking at a specific property in Allenwood (17810)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Allenwood (17810)

Free. Goes to licensed drillers working Lycoming County.

Part of Lycoming County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.