⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Columbia County › Millville (17846)

Millville, PA (17846): well depth, water level & drilling cost

✓ 208 PaGWIS records · Columbia County

142 ftmedian well depth
86 ft–215 fttypical depth range
30 ftmedian static water level
7 gpmmedian yield (128 tests)

Pull every recorded well near a Millville (17846) address — $49

How deep are wells in and around Millville (17846), Pennsylvania?

The median drilled well depth in and around Millville (17846) is 142 ft, based on 191 wells with recorded depths in the state PaGWIS database. Half fall between 86 ft and 215 ft; 90% are shallower than 380 ft.

How much does it cost to drill a well in and around Millville (17846)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Millville (17846)?

The median static water level is 30 ft below ground surface (middle half of wells: 17 ft–51 ft), from 54 measurements.

Drilled depth distribution

0–50 ft 18 50–100 ft 38 100–150 ft 41 150–200 ft 35 200–300 ft 25 300–400 ft 17 400–600 ft 14 600+ ft 3
Looking at a specific property in Millville (17846)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Millville (17846)

Free. Goes to licensed drillers working Columbia County.

Part of Columbia County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.