⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Schuylkill County › Shenandoah (17976)

Shenandoah, PA (17976): well depth, water level & drilling cost

✓ 72 PaGWIS records · Schuylkill County

25 ftmedian well depth
21 ft–62 fttypical depth range
35 ftmedian static water level
10 gpmmedian yield (7 tests)

Pull every recorded well near a Shenandoah (17976) address — $49

How deep are wells in and around Shenandoah (17976), Pennsylvania?

The median drilled well depth in and around Shenandoah (17976) is 25 ft, based on 72 wells with recorded depths in the state PaGWIS database. Half fall between 21 ft and 62 ft; 90% are shallower than 93 ft.

How much does it cost to drill a well in and around Shenandoah (17976)?

Applying published per-foot rates to the local median depth of 25 ft: drilling and casing alone typically runs $625–$1,625; a complete system including pump, pressure tank, and hookup typically runs $1,500–$2,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Shenandoah (17976)?

The median static water level is 35 ft below ground surface (middle half of wells: 28 ft–44 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 44 50–100 ft 21 100–150 ft 3 150–200 ft 1 200–300 ft 1 300–400 ft 1 400–600 ft 1 600+ ft 0
Looking at a specific property in Shenandoah (17976)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Shenandoah (17976)

Free. Goes to licensed drillers working Schuylkill County.

Part of Schuylkill County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.