⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Northampton County › Danielsville (18038)

Danielsville, PA (18038): well depth, water level & drilling cost

✓ 365 PaGWIS records · Northampton County

180 ftmedian well depth
125 ft–260 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (324 tests)

Pull every recorded well near a Danielsville (18038) address — $49

How deep are wells in and around Danielsville (18038), Pennsylvania?

The median drilled well depth in and around Danielsville (18038) is 180 ft, based on 357 wells with recorded depths in the state PaGWIS database. Half fall between 125 ft and 260 ft; 90% are shallower than 420 ft.

How much does it cost to drill a well in and around Danielsville (18038)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Danielsville (18038)?

The median static water level is 40 ft below ground surface (middle half of wells: 20 ft–60 ft), from 247 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 35 100–150 ft 76 150–200 ft 74 200–300 ft 90 300–400 ft 35 400–600 ft 37 600+ ft 6
Looking at a specific property in Danielsville (18038)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Danielsville (18038)

Free. Goes to licensed drillers working Northampton County.

Part of Northampton County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.