⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Northampton County › Martins Creek (18063)

Martins Creek, PA (18063): well depth, water level & drilling cost

✓ 264 PaGWIS records · Northampton County

168 ftmedian well depth
110 ft–260 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (212 tests)

Pull every recorded well near a Martins Creek (18063) address — $49

How deep are wells in and around Martins Creek (18063), Pennsylvania?

The median drilled well depth in and around Martins Creek (18063) is 168 ft, based on 260 wells with recorded depths in the state PaGWIS database. Half fall between 110 ft and 260 ft; 90% are shallower than 422 ft.

How much does it cost to drill a well in and around Martins Creek (18063)?

Applying published per-foot rates to the local median depth of 168 ft: drilling and casing alone typically runs $4,200–$10,920; a complete system including pump, pressure tank, and hookup typically runs $10,080–$16,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Martins Creek (18063)?

The median static water level is 40 ft below ground surface (middle half of wells: 24 ft–72 ft), from 190 measurements.

Drilled depth distribution

0–50 ft 17 50–100 ft 30 100–150 ft 59 150–200 ft 56 200–300 ft 45 300–400 ft 22 400–600 ft 25 600+ ft 6
Looking at a specific property in Martins Creek (18063)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Martins Creek (18063)

Free. Goes to licensed drillers working Northampton County.

Part of Northampton County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.