Pennsylvania Well Records › Carbon County › Jim Thorpe (18229)
Jim Thorpe, PA (18229): well depth, water level & drilling cost
✓ 827 PaGWIS records · Carbon County
Pull every recorded well near a Jim Thorpe (18229) address — $49
How deep are wells in Jim Thorpe (18229), Pennsylvania?
The median drilled well depth in Jim Thorpe (18229) is 220 ft, based on 819 wells with recorded depths in the state PaGWIS database. Half fall between 150 ft and 300 ft; 90% are shallower than 425 ft.
How much does it cost to drill a well in Jim Thorpe (18229)?
Applying published per-foot rates to the local median depth of 280 ft: drilling and casing alone typically runs $7,000–$18,200; a complete system including pump, pressure tank, and hookup typically runs $16,800–$28,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Jim Thorpe (18229)?
The median static water level is 45 ft below ground surface (middle half of wells: 24 ft–65 ft), from 573 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Carbon County.
Part of Carbon County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.