Pennsylvania Well Records › Lackawanna County › Clarks Summit (18411)
Clarks Summit, PA (18411): well depth, water level & drilling cost
✓ 676 PaGWIS records · Lackawanna County
Pull every recorded well near a Clarks Summit (18411) address — $49
How deep are wells in Clarks Summit (18411), Pennsylvania?
The median drilled well depth in Clarks Summit (18411) is 180 ft, based on 664 wells with recorded depths in the state PaGWIS database. Half fall between 40 ft and 310 ft; 90% are shallower than 440 ft.
How much does it cost to drill a well in Clarks Summit (18411)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Clarks Summit (18411)?
The median static water level is 120 ft below ground surface (middle half of wells: 69 ft–170 ft), from 241 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lackawanna County.
Part of Lackawanna County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.