⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Wayne County › White Mills (18473)

White Mills, PA (18473): well depth, water level & drilling cost

✓ 89 PaGWIS records · Wayne County

175 ftmedian well depth
48 ft–250 fttypical depth range
41 ftmedian static water level
18 gpmmedian yield (46 tests)

Pull every recorded well near a White Mills (18473) address — $49

How deep are wells in and around White Mills (18473), Pennsylvania?

The median drilled well depth in and around White Mills (18473) is 175 ft, based on 69 wells with recorded depths in the state PaGWIS database. Half fall between 48 ft and 250 ft; 90% are shallower than 320 ft.

How much does it cost to drill a well in and around White Mills (18473)?

Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around White Mills (18473)?

The median static water level is 41 ft below ground surface (middle half of wells: 20 ft–89 ft), from 19 measurements.

Drilled depth distribution

0–50 ft 18 50–100 ft 5 100–150 ft 6 150–200 ft 12 200–300 ft 15 300–400 ft 9 400–600 ft 1 600+ ft 3
Looking at a specific property in White Mills (18473)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in White Mills (18473)

Free. Goes to licensed drillers working Wayne County.

Part of Wayne County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.