⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Monroe County › Blakeslee (18610)

Blakeslee, PA (18610): well depth, water level & drilling cost

✓ 681 PaGWIS records · Monroe County

175 ftmedian well depth
123 ft–230 fttypical depth range
38 ftmedian static water level
20 gpmmedian yield (626 tests)

Pull every recorded well near a Blakeslee (18610) address — $49

How deep are wells in and around Blakeslee (18610), Pennsylvania?

The median drilled well depth in and around Blakeslee (18610) is 175 ft, based on 668 wells with recorded depths in the state PaGWIS database. Half fall between 123 ft and 230 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Blakeslee (18610)?

Applying published per-foot rates to the local median depth of 175 ft: drilling and casing alone typically runs $4,375–$11,375; a complete system including pump, pressure tank, and hookup typically runs $10,500–$17,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Blakeslee (18610)?

The median static water level is 38 ft below ground surface (middle half of wells: 22 ft–59 ft), from 554 measurements.

Drilled depth distribution

0–50 ft 14 50–100 ft 52 100–150 ft 164 150–200 ft 163 200–300 ft 186 300–400 ft 62 400–600 ft 26 600+ ft 1
Looking at a specific property in Blakeslee (18610)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Blakeslee (18610)

Free. Goes to licensed drillers working Monroe County.

Part of Monroe County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.