⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Sullivan County › Forksville (18616)

Forksville, PA (18616): well depth, water level & drilling cost

✓ 183 PaGWIS records · Sullivan County

112 ftmedian well depth
42 ft–180 fttypical depth range
25 ftmedian static water level
9 gpmmedian yield (125 tests)

Pull every recorded well near a Forksville (18616) address — $49

How deep are wells in and around Forksville (18616), Pennsylvania?

The median drilled well depth in and around Forksville (18616) is 112 ft, based on 166 wells with recorded depths in the state PaGWIS database. Half fall between 42 ft and 180 ft; 90% are shallower than 283 ft.

How much does it cost to drill a well in and around Forksville (18616)?

Applying published per-foot rates to the local median depth of 112 ft: drilling and casing alone typically runs $2,800–$7,280; a complete system including pump, pressure tank, and hookup typically runs $6,720–$11,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Forksville (18616)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–60 ft), from 61 measurements.

Drilled depth distribution

0–50 ft 44 50–100 ft 33 100–150 ft 31 150–200 ft 19 200–300 ft 25 300–400 ft 9 400–600 ft 5 600+ ft 0
Looking at a specific property in Forksville (18616)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Forksville (18616)

Free. Goes to licensed drillers working Sullivan County.

Part of Sullivan County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.