Pennsylvania Well Records › Luzerne County › Plymouth (18651)
Plymouth, PA (18651): well depth, water level & drilling cost
✓ 76 PaGWIS records · Luzerne County
Pull every recorded well near a Plymouth (18651) address — $49
How deep are wells in Plymouth (18651), Pennsylvania?
The median drilled well depth in Plymouth (18651) is 130 ft, based on 56 wells with recorded depths in the state PaGWIS database. Half fall between 22 ft and 263 ft; 90% are shallower than 375 ft.
How much does it cost to drill a well in Plymouth (18651)?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Plymouth (18651)?
The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–50 ft), from 17 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Luzerne County.
Part of Luzerne County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.