⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Bradford County › New Albany (18833)

New Albany, PA (18833): well depth, water level & drilling cost

✓ 180 PaGWIS records · Bradford County

174 ftmedian well depth
120 ft–234 fttypical depth range
35 ftmedian static water level
10 gpmmedian yield (101 tests)

Pull every recorded well near a New Albany (18833) address — $49

How deep are wells in and around New Albany (18833), Pennsylvania?

The median drilled well depth in and around New Albany (18833) is 174 ft, based on 113 wells with recorded depths in the state PaGWIS database. Half fall between 120 ft and 234 ft; 90% are shallower than 304 ft.

How much does it cost to drill a well in and around New Albany (18833)?

Applying published per-foot rates to the local median depth of 174 ft: drilling and casing alone typically runs $4,350–$11,310; a complete system including pump, pressure tank, and hookup typically runs $10,440–$17,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around New Albany (18833)?

The median static water level is 35 ft below ground surface (middle half of wells: 14 ft–70 ft), from 45 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 16 100–150 ft 30 150–200 ft 22 200–300 ft 27 300–400 ft 12 400–600 ft 5 600+ ft 0
Looking at a specific property in New Albany (18833)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in New Albany (18833)

Free. Goes to licensed drillers working Bradford County.

Part of Bradford County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.