Pennsylvania Well Records › Susquehanna County › New Milford (18834)
New Milford, PA (18834): well depth, water level & drilling cost
✓ 330 PaGWIS records · Susquehanna County
Pull every recorded well near a New Milford (18834) address — $49
How deep are wells in New Milford (18834), Pennsylvania?
The median drilled well depth in New Milford (18834) is 125 ft, based on 309 wells with recorded depths in the state PaGWIS database. Half fall between 25 ft and 270 ft; 90% are shallower than 404 ft.
How much does it cost to drill a well in New Milford (18834)?
Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in New Milford (18834)?
The median static water level is 60 ft below ground surface (middle half of wells: 28 ft–120 ft), from 79 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Susquehanna County.
Part of Susquehanna County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.