⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Bucks County › Carversville (18913)

Carversville, PA (18913): well depth, water level & drilling cost

✓ 113 PaGWIS records · Bucks County

177 ftmedian well depth
135 ft–280 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (77 tests)

Pull every recorded well near a Carversville (18913) address — $49

How deep are wells in and around Carversville (18913), Pennsylvania?

The median drilled well depth in and around Carversville (18913) is 177 ft, based on 93 wells with recorded depths in the state PaGWIS database. Half fall between 135 ft and 280 ft; 90% are shallower than 397 ft.

How much does it cost to drill a well in and around Carversville (18913)?

Applying published per-foot rates to the local median depth of 177 ft: drilling and casing alone typically runs $4,425–$11,505; a complete system including pump, pressure tank, and hookup typically runs $10,620–$17,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Carversville (18913)?

The median static water level is 40 ft below ground surface (middle half of wells: 23 ft–45 ft), from 58 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 6 100–150 ft 18 150–200 ft 24 200–300 ft 20 300–400 ft 10 400–600 ft 7 600+ ft 3
Looking at a specific property in Carversville (18913)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Carversville (18913)

Free. Goes to licensed drillers working Bucks County.

Part of Bucks County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.