Pennsylvania Well Records › Bucks County › Furlong (18925)
Furlong, PA (18925): well depth, water level & drilling cost
✓ 373 PaGWIS records · Bucks County
Pull every recorded well near a Furlong (18925) address — $49
How deep are wells in Furlong (18925), Pennsylvania?
The median drilled well depth in Furlong (18925) is 160 ft, based on 351 wells with recorded depths in the state PaGWIS database. Half fall between 100 ft and 278 ft; 90% are shallower than 400 ft.
How much does it cost to drill a well in Furlong (18925)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Furlong (18925)?
The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–50 ft), from 182 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bucks County.
Part of Bucks County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.