Pennsylvania Well Records › Montgomery County › Salford (18957)
Salford, PA (18957): well depth, water level & drilling cost
✓ 50 PaGWIS records · Montgomery County
Pull every recorded well near a Salford (18957) address — $49
How deep are wells in and around Salford (18957), Pennsylvania?
The median drilled well depth in and around Salford (18957) is 197 ft, based on 49 wells with recorded depths in the state PaGWIS database. Half fall between 150 ft and 250 ft; 90% are shallower than 384 ft.
How much does it cost to drill a well in and around Salford (18957)?
Applying published per-foot rates to the local median depth of 197 ft: drilling and casing alone typically runs $4,925–$12,805; a complete system including pump, pressure tank, and hookup typically runs $11,820–$19,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Salford (18957)?
The median static water level is 43 ft below ground surface (middle half of wells: 31 ft–58 ft), from 20 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Montgomery County.
Part of Montgomery County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.