Pennsylvania Well Records › Montgomery County › Glenside (19038)
Glenside, PA (19038): well depth, water level & drilling cost
✓ 304 PaGWIS records · Montgomery County
Pull every recorded well near a Glenside (19038) address — $49
How deep are wells in Glenside (19038), Pennsylvania?
The median drilled well depth in Glenside (19038) is 28 ft, based on 154 wells with recorded depths in the state PaGWIS database. Half fall between 20 ft and 52 ft; 90% are shallower than 303 ft.
How much does it cost to drill a well in Glenside (19038)?
Applying published per-foot rates to the local median depth of 28 ft: drilling and casing alone typically runs $700–$1,820; a complete system including pump, pressure tank, and hookup typically runs $1,680–$2,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Glenside (19038)?
The median static water level is 30 ft below ground surface (middle half of wells: 16 ft–33 ft), from 19 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Montgomery County.
Part of Montgomery County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.