⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Chester County › Lewisville (19351)

Lewisville, PA (19351): well depth, water level & drilling cost

✓ 53 PaGWIS records · Chester County

145 ftmedian well depth
100 ft–172 fttypical depth range
29 ftmedian static water level
10 gpmmedian yield (53 tests)

Pull every recorded well near a Lewisville (19351) address — $49

How deep are wells in and around Lewisville (19351), Pennsylvania?

The median drilled well depth in and around Lewisville (19351) is 145 ft, based on 53 wells with recorded depths in the state PaGWIS database. Half fall between 100 ft and 172 ft; 90% are shallower than 249 ft.

How much does it cost to drill a well in and around Lewisville (19351)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lewisville (19351)?

The median static water level is 29 ft below ground surface (middle half of wells: 25 ft–40 ft), from 44 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 12 100–150 ft 17 150–200 ft 13 200–300 ft 10 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Lewisville (19351)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lewisville (19351)

Free. Goes to licensed drillers working Chester County.

Part of Chester County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.