⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Montgomery County › Kulpsville (19443)

Kulpsville, PA (19443): well depth, water level & drilling cost

✓ 96 PaGWIS records · Montgomery County

135 ftmedian well depth
97 ft–300 fttypical depth range
33 ftmedian static water level
24 gpmmedian yield (59 tests)

Pull every recorded well near a Kulpsville (19443) address — $49

How deep are wells in and around Kulpsville (19443), Pennsylvania?

The median drilled well depth in and around Kulpsville (19443) is 135 ft, based on 91 wells with recorded depths in the state PaGWIS database. Half fall between 97 ft and 300 ft; 90% are shallower than 500 ft.

How much does it cost to drill a well in and around Kulpsville (19443)?

Applying published per-foot rates to the local median depth of 135 ft: drilling and casing alone typically runs $3,375–$8,775; a complete system including pump, pressure tank, and hookup typically runs $8,100–$13,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kulpsville (19443)?

The median static water level is 33 ft below ground surface (middle half of wells: 20 ft–52 ft), from 28 measurements.

Drilled depth distribution

0–50 ft 11 50–100 ft 15 100–150 ft 25 150–200 ft 8 200–300 ft 7 300–400 ft 9 400–600 ft 15 600+ ft 1
Looking at a specific property in Kulpsville (19443)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kulpsville (19443)

Free. Goes to licensed drillers working Montgomery County.

Part of Montgomery County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.