⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Montgomery County › Gilbertsville (19525)

Gilbertsville, PA (19525): well depth, water level & drilling cost

✓ 1,096 PaGWIS records · Montgomery County

130 ftmedian well depth
100 ft–172 fttypical depth range
25 ftmedian static water level
25 gpmmedian yield (864 tests)

Pull every recorded well near a Gilbertsville (19525) address — $49

How deep are wells in and around Gilbertsville (19525), Pennsylvania?

The median drilled well depth in and around Gilbertsville (19525) is 130 ft, based on 981 wells with recorded depths in the state PaGWIS database. Half fall between 100 ft and 172 ft; 90% are shallower than 215 ft.

How much does it cost to drill a well in and around Gilbertsville (19525)?

Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gilbertsville (19525)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–41 ft), from 688 measurements.

Drilled depth distribution

0–50 ft 37 50–100 ft 141 100–150 ft 457 150–200 ft 192 200–300 ft 115 300–400 ft 26 400–600 ft 11 600+ ft 2
Looking at a specific property in Gilbertsville (19525)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gilbertsville (19525)

Free. Goes to licensed drillers working Montgomery County.

Part of Montgomery County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.