⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Berks County › Limekiln (19535)

Limekiln, PA (19535): well depth, water level & drilling cost

✓ 142 PaGWIS records · Berks County

180 ftmedian well depth
125 ft–300 fttypical depth range
40 ftmedian static water level
20 gpmmedian yield (47 tests)

Pull every recorded well near a Limekiln (19535) address — $49

How deep are wells in and around Limekiln (19535), Pennsylvania?

The median drilled well depth in and around Limekiln (19535) is 180 ft, based on 85 wells with recorded depths in the state PaGWIS database. Half fall between 125 ft and 300 ft; 90% are shallower than 379 ft.

How much does it cost to drill a well in and around Limekiln (19535)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Limekiln (19535)?

The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–60 ft), from 57 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 7 100–150 ft 16 150–200 ft 19 200–300 ft 13 300–400 ft 15 400–600 ft 7 600+ ft 1
Looking at a specific property in Limekiln (19535)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Limekiln (19535)

Free. Goes to licensed drillers working Berks County.

Part of Berks County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.